yokonzo@lemmy.world to 3DPrinting@lemmy.worldEnglish · 11 months agoMy outer walls are printing fine, but my infills are super wispymessage-squaremessage-square19fedilinkarrow-up134arrow-down10file-text
arrow-up134arrow-down1message-squareMy outer walls are printing fine, but my infills are super wispyyokonzo@lemmy.world to 3DPrinting@lemmy.worldEnglish · 11 months agomessage-square19fedilinkfile-text
minus-squaredual_sport_dork 🐧🗡️@lemmy.worldlinkfedilinkEnglisharrow-up13·11 months agoIs your infill move speed just set to be absurdly fast or something? Also, is it part of the design of your model for the walls of your parts to be all wavy like that?
minus-squareyokonzo@lemmy.worldOPlinkfedilinkEnglisharrow-up5·edit-211 months agoI’m printing this design , so i think yes they are kind of wavy
minus-squareWilliam@lemmy.worldlinkfedilinkEnglisharrow-up3·11 months agoYeah, I definitely think they’re extruding the insides too fast. Perhaps it’s a partial clog, or maybe the settings are too high.
minus-squareyokonzo@lemmy.worldOPlinkfedilinkEnglisharrow-up1·11 months agoIt has been a while, i’ll both unclog and replace the nozzle and see if that fixes anything
Is your infill move speed just set to be absurdly fast or something?
Also, is it part of the design of your model for the walls of your parts to be all wavy like that?
I’m printing this design , so i think yes they are kind of wavy
Yeah, I definitely think they’re extruding the insides too fast. Perhaps it’s a partial clog, or maybe the settings are too high.
It has been a while, i’ll both unclog and replace the nozzle and see if that fixes anything