misk@sopuli.xyz to Technology@lemmy.worldEnglish · edit-26 hours agoBrother accused of locking down third-party printer ink cartridges via forced firmware updates, removing older firmware versions from support portals [see comments]www.tomshardware.comexternal-linkmessage-square207fedilinkarrow-up11.13Karrow-down14file-textcross-posted to: [email protected]
arrow-up11.13Karrow-down1external-linkBrother accused of locking down third-party printer ink cartridges via forced firmware updates, removing older firmware versions from support portals [see comments]www.tomshardware.commisk@sopuli.xyz to Technology@lemmy.worldEnglish · edit-26 hours agomessage-square207fedilinkfile-textcross-posted to: [email protected]
Brother deny the claims: https://arstechnica.com/gadgets/2025/03/brother-denies-using-firmware-updates-to-brick-printers-with-third-party-ink/ via https://startrek.website/comment/15279250
minus-squareNotMyOldRedditName@lemmy.worldlinkfedilinkEnglisharrow-up23arrow-down1·20 hours agoAnd this is why I’ll never connect my working printer to the internet. Taking a USB stick to it to print is annoying, but fuck this shit. They’re all horrible companies
minus-squareftbd@feddit.orglinkfedilinkEnglisharrow-up18·19 hours agoWhat’s stopping you from connecting it to the local network but denying internet access? E.g. via a firewall rule or separate VLAN?
minus-squarejohn_lemmy@lemmy.mllinkfedilinkEnglisharrow-up4·11 hours agounderstandable, have a good day
minus-squareamphetaminisiert@feddit.nllinkfedilinkEnglisharrow-up3·14 hours agoAs if using an USB stick to print isn’t more effort 😂
minus-squareLuffy@lemmy.mllinkfedilinkEnglisharrow-up9·19 hours agoJust connect it to a Server (like a raspi) via USB and share the printer through CUPS Its a little tedious to set up, but it works
minus-squarenickwitha_k (he/him)@lemmy.sdf.orglinkfedilinkEnglisharrow-up2·20 minutes agoThis is the way.
minus-squareNevermore9197@lemmy.worldlinkfedilinkEnglisharrow-up3·11 hours agoIs there a step by step anywhere to achieve this? I’m adept in tech. But don’t have the training or knowledge to just do it
minus-squareivanafterall ☑️@lemmy.worldlinkfedilinkEnglisharrow-up8·14 hours agoHow many cups does it take to transfer the printer over?
minus-square_apokalipto_@lemmy.worldlinkfedilinkEnglisharrow-up3·11 hours agoI think you can just use 1 large bucket instead of many small cups. Faster that way.
minus-squaredan@upvote.aulinkfedilinkEnglisharrow-up3arrow-down2·16 hours agoWhy do that when you could just connect it to the LAN and put it on a separate VLAN?
minus-squarenickwitha_k (he/him)@lemmy.sdf.orglinkfedilinkEnglisharrow-up1·18 minutes agoBecause the built-in networking stack on printers is garbage and having to install drivers on every client sucks.
minus-squareareyouevenreal@lemm.eelinkfedilinkEnglisharrow-up4·14 hours agoBecause it’s a lot simpler and avoids the issue of dealing with printer drivers on all your machines.
minus-squarefrezik@midwest.sociallinkfedilinkEnglisharrow-up3·edit-214 hours agoI could see the argument that it’s more air gapped this way. Without having physical access to the Pi (or at least SSH access), it’d be hard to get any network connection through USB. But personally, I just blocked outgoing traffic from the printer.
And this is why I’ll never connect my working printer to the internet.
Taking a USB stick to it to print is annoying, but fuck this shit.
They’re all horrible companies
What’s stopping you from connecting it to the local network but denying internet access? E.g. via a firewall rule or separate VLAN?
effort
understandable, have a good day
Most relatable comment ever.
As if using an USB stick to print isn’t more effort 😂
Just connect it to a Server (like a raspi) via USB and share the printer through CUPS
Its a little tedious to set up, but it works
This is the way.
Is there a step by step anywhere to achieve this? I’m adept in tech. But don’t have the training or knowledge to just do it
How many cups does it take to transfer the printer over?
I think you can just use 1 large bucket instead of many small cups. Faster that way.
Why do that when you could just connect it to the LAN and put it on a separate VLAN?
Because the built-in networking stack on printers is garbage and having to install drivers on every client sucks.
Because it’s a lot simpler and avoids the issue of dealing with printer drivers on all your machines.
I could see the argument that it’s more air gapped this way. Without having physical access to the Pi (or at least SSH access), it’d be hard to get any network connection through USB.
But personally, I just blocked outgoing traffic from the printer.