Thanks for the tip. I might have to try that. It was working mostly fine one day (no VRR) and then it was completely broken the next. :(

VRR isn’t supported by default by most distros. Just because it works with your setup doesn’t mean it works for others.

Also, this event seems to be primarily focused on AMD/Mesa support.

Err… no it doesn’t. There are so many bug reports of neither HDR nor VRR working properly with the steam deck. My deck won’t even dock properly with my TV after recent updates.

It’s better than most other linuxes in the sense that it works sometimes I guess.

I’m pretty sure it’s possible to overfit even with large testing sets.

We need to be very careful with news outlets that focus on science hype. Often times they’re jumping to conclusions based on poorly written papers that have yet to be peer reviewed and reproduced.

Just take a look at the homepage of this website. They post several times a day with much of it being obvious clickbait backed by very little journalistic integrity.

It sounds like the model is overfitting the training data. They say it scored 100% on the testing set of data which almost always indicates that the model has learned how to ace the training set but flops in the real world.

I think we shouldn’t put much weight behind this news article. This is just more overblown hype for the sake of clicks.

KDE Neon using X11 with latest stable kernel+Mesa.

I run an RX6600 and haven’t had any freezing issues. Which version of Mesa and which games? If it’s all OpenGL games that would be rather strange.

The easiest way to explain divide by zero is to think of division as repeated subtraction. For a simple example of 4 / 2 we know that we would have to subtract 2 from 4 twice to reduce it to 0.

When we divide by zero we’re functionally asking how many times can we remove zero from the numerator until it is reduced to zero. We typically state the answer as infinity or NaN because we know that we could do this operation indefinitely without the numerator reducing to 0.

As in via a product? Code itself isn’t worth much. It’s the stuff we make with it that has value.

Well that’s worrying… thanks for the heads up!

Yeah, I keep everything important backed up. I’m definitely fine if it dies. I’m just curious really.

It’s a relatively recent 1TB Samsung 980.

rtctl 7.2 2020-12-30 r5155 [x86_64-linux-6.5.3-060503-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       Samsung SSD 980 1TB
Serial Number:                      S64ANJ0RA44661N
Firmware Version:                   1B4QFXO7
PCI Vendor/Subsystem ID:            0x144d
IEEE OUI Identifier:                0x002538
Total NVM Capacity:                 1,000,204,886,016 [1.00 TB]
Unallocated NVM Capacity:           0
Controller ID:                      5
NVMe Version:                       1.4
Number of Namespaces:               1
Namespace 1 Size/Capacity:          1,000,204,886,016 [1.00 TB]
Namespace 1 Utilization:            553,282,572,288 [553 GB]
Namespace 1 Formatted LBA Size:     512
Namespace 1 IEEE EUI-64:            002538 da11440dac
Local Time is:                      Thu Oct  5 13:48:48 2023 PDT
Firmware Updates (0x16):            3 Slots, no Reset required
Optional Admin Commands (0x0017):   Security Format Frmw_DL Self_Test
Optional NVM Commands (0x0055):     Comp DS_Mngmt Sav/Sel_Feat Timestmp
Log Page Attributes (0x0f):         S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg
Maximum Data Transfer Size:         512 Pages
Warning  Comp. Temp. Threshold:     82 Celsius
Critical Comp. Temp. Threshold:     85 Celsius
Namespace 1 Features (0x10):        NP_Fields

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     5.24W       -        -    0  0  0  0        0       0
 1 +     4.49W       -        -    1  1  1  1        0       0
 2 +     2.19W       -        -    2  2  2  2        0     500
 3 -   0.0500W       -        -    3  3  3  3      210    1200
 4 -   0.0050W       -        -    4  4  4  4     1000    9000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning:                   0x00
Temperature:                        37 Celsius
Available Spare:                    100%
Available Spare Threshold:          10%
Percentage Used:                    1%
Data Units Read:                    8,707,548 [4.45 TB]
Data Units Written:                 16,750,179 [8.57 TB]
Host Read Commands:                 60,932,777
Host Write Commands:                210,324,713
Controller Busy Time:               348
Power Cycles:                       802
Power On Hours:                     384
Unsafe Shutdowns:                   64
Media and Data Integrity Errors:    1
Error Information Log Entries:      1
Warning  Comp. Temperature Time:    2470
Critical Comp. Temperature Time:    0
Temperature Sensor 1:               37 Celsius
Temperature Sensor 2:               47 Celsius
Thermal Temp. 2 Transition Count:   54637
Thermal Temp. 2 Total Time:         114793

Error Information (NVMe Log 0x01, 16 of 64 entries)
No Errors Logged

I’m not sure if this a joke. Noise cameras are a real thing. They use an array of microphones to show which parts of an image are emitting sound and at what level.

Gnome and Pop OS. I only briefly tried Wayland but multiple games just failed to launch or would launch and then crash not launch again.

I’ve tried wayland but it seems like games often don’t work :(

Same experience here. I recently made the switch and love how so many regular annoyances disappeared.

For me it seems like games regularly fail to launch on Wayland but are fine with X. Did you try Gamescope?