Is that moldable?
That’s too much time and I just don’t have time for it unfortunately
why do you avoid sanding?
I’m interested in doing it for figures/busts and cosplay parts
Ah thanks for the input…I didn’t think about all spools spinning the samed until you mentioned it so I just decided to print the individual rings that I would put the bearings in then I’m gonna put them on a metal rod.
Also not sure you would know, would i be fine printing the bearings to use or should I get metal ones
I have silica packets
Here is what I was thinking https://www.thingiverse.com/thing:2494109
But not sure if it would work
For my first dry box I’m currently using a 1.5 diameter PVC with 8 spools I haven’t noticed any sagging (should I upgrade to a bigger PVC pipe though just in case?)
I just don’t trust it as much as I thought and don’t want as many holes which is why I was wondering if I could place the filament for muy second dry box on like two PVC pipes and have them be used as a roller
Np lol. I honestly didn’t expect it, like it’s screwed down so how could it move? I love troubleshooting soooooo much
I’m dumb, I found the issue…One of the bearings was sticking out Idk how I missed that especially looking stuff up ;-;
Yup. And not sure if it matters either but x axis reads as 251
Yep.
Figured I’d make a post while I wait the 30 minutes
So I should be fine if my charger ranges from 19-24V? Or does it need to only be 24v?
Not sure how familiar you are with electronic stuff, but the fans I have are 24v and 0.1A my laptop charger outputs up to 6A that shouldn’t be an issue right?
Seems complicated I might just connect it to and adapter I can plug my 24v laptop charger into or just getting a buck converter
Like I said in my other comment
would it just be better for me to use one of these https://www.amazon.com/gp/product/B07C61434H/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 with a laptop charger?
Idk what type of connector my printer uses since my fan is different
How about a raspberry pi?
Would that still cause a fire?
Would I connect both positive and negative to it?
Also would it just be better for me to use one of these https://www.amazon.com/gp/product/B07C61434H/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 with a laptop charger?
Ah ok I’ll look into that then as long as I can put it on thick that should work.