Dreadino

It’s not, it’s just that forests are really bad for phone signals. Trees disrupting the signal, valleys and sides of mountains with no direct view of antennas and just remoteness in general. I’ve been in a lot of forests with no cell reception, that’s why you always go with an offline map and tell someone where you are going.

It’s not a case that one of the leading phone company in the world has a satellite emergency mode.

In a forest, away from humans, under trees, you won’t have a signal to send SMSs or get a data connection either.

I connected my sectional garage door using a Shelly 1, an Aqara vibration sensor and the contact sensor from my alarm system (but you can use an Aqara door sensor), using Home Assistant to create a “virtual” door that does all the things.

Put the vibration sensor around the bottom of the door. Connect the Shelly to the hardware button you have somewhere in your garage, set it to toggle off after 1 second (simulating a button click basically). In Home Assistant do something like this:

- platform: template
  covers:
    garage_door:
      device_class: garage
      friendly_name: "Garage Door"
      value_template: >-
        {% if is_state( "binary_sensor.garage_door_contact_sensor", "off") %}
          closed
        {% elif states( "sensor.garage_door_vibration_sensor_angle_y") | int < 10 %}
          open
        {% elif is_state( "binary_sensor.garage_door_vibration_sensor_vibration", "on") %}
          opening
        {% else %}
          open
        {%- endif %}
      open_cover:
        service: script.disarm_alarm_if_armed_then_open_garage_door
      close_cover:
        service: switch.turn_on
        data:
          entity_id: switch.garage_door_shelly_1
      stop_cover:
        service: switch.turn_on
        data:
          entity_id: switch.garage_door_shelly_1
      icon_template: >-
        {% if is_state( "binary_sensor.garage_door_contact_sensor", "off") %}
          mdi:garage
        {% elif states( "sensor.garage_door_vibration_sensor_angle_y") | int < 10 %}
          mdi:garage-open
        {% elif is_state( "binary_sensor.garage_door_vibration_sensor_vibration", "on") %}
          mdi:garage-alert
        {% else %}
          mdi:garage-open
        {%- endif %}

Basically if the contact sensor is off (means there is contact), the door is closed. If the vibration sensor angle is < 10 (check your values, this works for me), the door is open (the sections are now horizontal). If the vibration sensor senses vibrations, the door is currently moving. Otherwise report “open”, because that’s the worst state and if something doesn’t work, I want the worst state to be reported. Now you have a “cover”, which in Home Assistant is a class that has custom UIs and logic to handle the door. Whenever I click the open button or call the command from anywhere, “disarm_alarm_if_armed_then_open_garage_door” is called, meaning I can’t make the alarm go off by accident.

I have an automation that when I get near my house, it checks if my alarm is on and sends me a notification with 2 actions:

• disarm alarm
• disarm alarm and open garage door

PS: Looking back at my code, I should add a condition to both “open_cover” and “close_cover”, to check if the door is opening, making it fail (or just do nothing), because while moving, pressing the button would stop the door, not make it go in the reverse direction. But it’s been 4 months with this integration and it works great.

I got my PS2, with GTA3, for Xmas. No memory card though, so I stayed up all night to play it, not realizing I could just left it on. I bought the memory card 3 days later, when shops reopened, the PS2 was never shut down.

I used to use Octoprint to connect to an Ender 3, which didn’t come with an internet connection. Now that I have an Ankermake M5, I don’t use it anymore.

You could connect your desktop to the 3D printer, I don’t think a Raspberry is required.

ONVIF needs a user with username and password, you will need at least a web interface to add it to the camera. What’s the problem with a web app hosted by the camera?

Does it have a big screen layout? I’d use it on my Mac in a heartbeat