• 7 Posts
  • 52 Comments
Joined 1 year ago
cake
Cake day: August 31st, 2023

help-circle











  • I was interested in technology and programming and my mom recommended me to check out a raspberry pi. Her friend’s son has one. So my first comouter was a raspberry pi with RaspbianOS when I got my first PC it seemd normal to install something that I was using for the last year and its free. So I installed Pop!_Os, a year later Fedora and a half year later Arch. I’ve been using Arch for more than 2 years now.



  • chevy9294@monero.towntoLinux@lemmy.mlSo I installed Arch Linux... Is this it?
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    1
    ·
    4 months ago

    I’m using Arch because you start with nothing and you can make any system you want. I have disk encryption, btrfs as a filesystem, secure boot with my own custom keys, I’m running self-build kernel, I’m using apparmor and I can use any program from AUR, etc. Thats my personality. Things that you can’t see but are important to me.

    On other distros some of these things would be very hard to do. Especially without Arch Wiki.



  • chevy9294@monero.towntoSelfhosted@lemmy.worldConfused about Podman
    link
    fedilink
    English
    arrow-up
    1
    arrow-down
    2
    ·
    4 months ago

    I switched from Docker to Podman, because Podman is more secure (if rootless) but it was just hard to autostart containars. You have to start one by one because they don’t have a central service like docker. And watchtower and nextcloud AIO don’t work on Podman. So I switched back to docker.



  • To 3d print something you need to convert a model (.stl or something else) to gcode. A slicer will do this for you. I use Cura (it’s open source) and works great on Linux. Then you have to send that gcode to the printer. You can do that with micro SD card which is what I noramlly do or you can connect to the printer using USB cable and send the gcode using a slicer.



  • That was really hard to do. I created a note for myself and I will also publish it on my website. You can also decrypt the sd using fido2 hardware key (I have a nitrokey). If you don’t need that just skip steps that are for fido2.

    The note:

    Download the image.

    Format SD card to new DOS table:

    • Boot: 512M 0c W95 FAT32 (LBA)
    • Root: 83 Linux

    As root:

    xz -d 2023-12-11-raspios-bookworm-arm64-lite.img.xz
    losetup -fP 2023-12-11-raspios-bookworm-arm64-lite.img
    dd if=/dev/loop0p1 of=/dev/mmcblk0p1 bs=1M
    cryptsetup luksFormat --type=luks2 --cipher=xchacha20,aes-adiantum-plain64 /dev/mmcblk0p2
    systemd-cryptenroll --fido2-device=auto /dev/mmcblk0p2
    cryptsetup open /dev/mmcblk0p2 root
    dd if=/dev/loop0p2 of=/dev/mapper/root bs=1M
    e2fsck -f /dev/mapper/root
    resize2fs -f /dev/mapper/root
    mount /dev/mapper/root /mnt
    mount /dev/mmcblk0p1 /mnt/boot/firmware
    arch-chroot /mnt
    

    In chroot:

    apt update && apt full-upgrade -y && apt autoremove -y && apt install cryptsetup-initramfs fido2-tools jq debhelper git vim -y
    git clone https://github.com/bertogg/fido2luks && cd fido2luks
    fakeroot debian/rules binary && sudo apt install ../fido2luks*.deb
    cd .. && rm -rf fido2luks*
    

    Edit /etc/crypttab:

    root            /dev/mmcblk0p2          none            luks,keyscript=/lib/fido2luks/keyscript.sh
    

    Edit /etc/fstab:

    /dev/mmcblk0p1    /boot/firmware  vfat    defaults          0       2
    /dev/mapper/root  /               ext4    defaults,noatime  0       1
    

    Change root to /dev/mapper/root and add cryptdevice=/dev/mmcblk0p2:root to /boot/firmware/cmdline.txt.

    PATH="$PATH:/sbin"
    update-initramfs -u
    

    Exit chroot and finish!

    umount -R /mnt