Calibrate your reaction settings

Imagine how much messier the Saturn is if I tell you it’s much messier than the FL

The process is generally: Slice Print with resin printer Clean in ipa bath to remove excess resin Air dry Cure in a uv enclosure

My knowledge is limited but from my experience Formlabs printers are high quality and as close to plug and print as you’ll get. The proprietary slicer is very good but also somewhat limited. Also Formlabs printers are expensive.

I’ve also used an Elegoo Saturn 2. There’s a lot of hassle involved but the printer and resin are much cheaper and you have a lot more freedom with materials, slicers, customization, etc.

It’s all hit or miss but some of his stuff kills me. Watch his GTA videos if you’re into that

Dunkey is a treasure

Removed by mod

Removed by mod

Removed by mod

This is so wrong

Removed by mod

Removed by mod

Removed by mod